Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Before using for the first time
- Operation
- Keeping food warm
- Warming crockery
- Low temperature cooking
- Other uses
- Networking with Miele built-in appliances
- Sabbath mode
- Cleaning and care
- Problem solving guide
- Optional accessories
- After sales service
- Installation
- EU Conformity declaration
- UK Conformity declaration
Problem solving guide
39
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem Cause and remedy
The drawer does not
heat up.
The appliance is not correctly plugged in and
switched on at the power socket.
Insert the plug and switch on at the socket.
The fuse has tripped.
Reset the trip switch in the fuse box or replace the
fuse in the plug (see data plate for minimum fuse
rating). If, after resetting/replacing the trip switch in
the fuse box or the residual current protection
device, the drawer will still not turn on, contact a
qualified electrician or the Miele Customer Service
Department.
Noises during operation
The noise is from the fan which circulates warm air
for even heat distribution. This is not a fault.
The food is not hot
enough.
The function for keeping food warm is not selec-
ted.
Select the correct function.
The temperature setting is too low.
Select a higher temperature.
The vents are covered up.
Ensure that the air can circulate freely.
The food is too hot. The function for keeping food warm is not selec-
ted.
Select the correct function.
The temperature setting is too high.
Select a lower temperature.