Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Before using for the first time
- Operation
- Keeping food warm
- Warming crockery
- Low temperature cooking
- Other uses
- Networking with Miele built-in appliances
- Sabbath mode
- Cleaning and care
- Problem solving guide
- Optional accessories
- After sales service
- Installation
- EU Conformity declaration
- UK Conformity declaration
Problem solving guide
40
Problem Cause and remedy
The dishes are not hot
enough.
The operating mode for warming plates/dishes
was not selected.
Select the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The vents are covered up.
Make sure that the air can circulate.
The dishes have not been allowed to heat up for a
sufficiently long time.
The heating time for dishes is affected by a num-
ber of factors (see “Heating dishes”).
The dishes are too hot. The operating mode for warming plates/dishes or
cups/glasses was not selected.
Select the correct operating mode.
The temperature setting is too high.
Select a lower temperature.
Abrasion marks on the
top edge of the front
panel.
Installing or removing an appliance above the drawer
has caused abrasion marks.
Carefully remove the abrasion marks by rubbing
the top edge with the abrasive side of a standard
scouring pad.