Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Before using for the first time
- Operation
- Keeping food warm
- Warming crockery
- Low temperature cooking
- Other uses
- Networking with Miele built-in appliances
- Sabbath mode
- Cleaning and care
- Problem solving guide
- Optional accessories
- After sales service
- Installation
- EU Conformity declaration
- UK Conformity declaration
Installation
*INSTALLATION*
43
Safety instructions for installation
Risk of damage from incorrect installation.
Incorrect installation can cause damage to the drawer and/or the combination
appliance.
The appliance must only be installed by a qualified person.
The socket and on-off switch should be easily accessible after the
drawer has been installed.
The drawer may only be built in in combination with those appli-
ances quoted by Miele as being suitable. Miele cannot guarantee
trouble-free operation if the appliance is operated in combination
with appliances other than those quoted by Miele as being suitable.
The base on which the drawer and the combination appliance are
fitted must be fixed in place and must support the weight of both ap-
pliances.
When building in the combination appliance, it is essential to fol-
low the instructions given in the operating and installation instruc-
tions supplied with the combination appliance.
When installing the drawer, the following should be noted:
- The contents of the dishes must be visible. This is to avoid scald-
ing from hot food spilling over.
- There must be enough space for the drawer to be pulled out fully.