Operation Manual

Safety instructions for installation
39
 Incorrect installation can result in personal injury and damage
to property.
 Before connecting the drawer to the mains supply, ensure that the
connection data on the data plate (voltage and frequency) match the
mains electricity supply.
This data must correspond in order to avoid the risk of damage to
the drawer. Consult a qualified electrician if in any doubt.
 The soc
ket and on-off switch should be easily accessible after the
drawer has been installed.
 The dr
awer may only be built in in combination with those appli‐
ances quoted by Miele as being suitable. Miele cannot guarantee
trouble-free operation if the appliance is operated in combination
with appliances other than those quoted by Miele as being suitable.
 The base on which
the drawer and the combination appliance are
fitted must be fixed in place and must support the weight of both
appliances.
 When building in
the combination appliance, it is essential to fol‐
low the instructions given in the operating and installation instruc‐
tions supplied with the combination appliance.
 The dr
awer must be installed in such a way that
– the contents of crockery can be seen. This is to avoid scalding
fr
om hot food spilling over.
– there is enough space for the drawer to be pulled out fully.