Operation Manual

Electrical connection
51
Disconnecting from the mains
 Danger of electric shock.
After disconnection, ensure the ap‐
pliance cannot be switched back on
by mistak
e.
To disconnect the appliance from the
mains power supply, do one of the fol‐
lowing depending on installation:
Safety fuses
 Complet
ely remove fuses
Automatic circuit breakers
 P
ress the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers type B or C:
 Switch the on/off s
witch from 1 (on)
to 0 (off).
Residual current device (RCD)
(Residual current circuit breaker)
 Switch the main sw
itch from 1 (on) to
0 (off) or press the test button.
Replacing the mains connec‐
tion cable
If the mains cable needs to be replaced
it must be r
eplaced with a special con‐
nection cable, type H 05 VV-F (PVC-in‐
sulated), available from Miele.