Operating and Installation Instructions Warming Drawer To prevent accidents and machine damage, read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 4 Overview............................................................................................................... 11 Included accessories............................................................................................. 12 Control panel ....................................................................................................... 13 Before using for the first time .............
Contents MieleCare .............................................................................................................
IMPORTANT SAFETY INSTRUCTIONS This warming drawer conforms to current safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using the appliance for the first time. They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage occurring as a result of non-compliance with these instructions.
IMPORTANT SAFETY INSTRUCTIONS Use This warming drawer is intended for domestic use and use in other similar environments. The warming drawer is not intended for outdoor use. The warming drawer is intended for domestic use only as described in these instructions. All other use is at the owner's own risk and could be dangerous.
IMPORTANT SAFETY INSTRUCTIONS Children As with any appliance, close supervision is necessary when used by children. Do not leave children unattended: Children should not be alone or unsupervised in the area where the appliance is installed. Do not allow them to sit or stand on the appliance. Be sure to supervise any children in the vicinity of the warming drawer, and do not let them play with it. The warmer drawer gets hot when in use and remains hot for some time after being switched off.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. A damaged warming drawer can be dangerous.
IMPORTANT SAFETY INSTRUCTIONS Any contact with live connections or tampering with the electrical or mechanical components of the warming drawer will endanger your safety and may lead to appliance malfunctions. Do not open the casing of the warming drawer under any circumstances. Any repairs not performed by a Miele authorized service technician will void the warranty. Defective components should be replaced by Miele original parts only.
IMPORTANT SAFETY INSTRUCTIONS Proper use You can burn yourself on a hot warming drawer. When using the appliance, protect your hands by wearing heat-resistant pot holders. Only use dry pot holders. Wet or damp textiles conduct heat more effectively and produce steam, which poses a burn hazard. Fire hazard! Do not store any plastic containers or flammable objects in the warming drawer. They can meld or catch fire when the appliance is switched on.
IMPORTANT SAFETY INSTRUCTIONS The "Keep Warm" mode is to be used for keeping hot dishes warm, not for heating up cold food. Make sure that any food placed in the drawer has a high enough temperature. In some foods, bacterial growth may occur if the temperature is too low. Set the appliance to an adequate warming temperature. Loose fitting or hanging garments present a fire hazard. Wear proper apparel while operating the appliance.
Overview a Non-slip mat b Control panel c Push/pull opening mechanism The drawer can be opened and closed by pressing lightly in the middle of the drawer front.
Overview Included accessories The accessories supplied with your appliance, as well as a range of optional ones, are available to order from Miele (see "Optional accessories"). Non-slip mat For keeping dishware secure.
Control panel Sensor buttons Sensor button Description On/Off button Menu Selects the operating mode Temperature Sets the temperature Duration Sets the duration Display Display Description Warm Cups/Glasses mode Warm Dishes/Plates mode Keep Warm mode Low Temperature mode Temperature display with segment bars 1h Duration of 1 hour 2h Duration of 2 hours 3h Duration of 3 hours 4h Duration of 4 hours 13
Before using for the first time Please adhere the extra data plate for the appliance supplied with this documentation in the space provided in the "Technical service, data plate, warranty" section of this manual. Heating the drawer for the first time Remove any protective foil and stickers. Tap the button to switch on the drawer. Cleaning the drawer for the first time Tap the "Menu" button repeatedly until the symbol lights up.
Operation Basic operation The button must remain free of debris and liquids. Failure to keep the sensor button clean may cause it to become unresponsive or to switch uncontrollably. Liquids that get inside the drawer can cause a short-circuit. Open and close a loaded drawer carefully to prevent liquids from spilling. Open the drawer. Tap the button to switch on the drawer. Tap the "Menu" button repeatedly until the desired mode lights up.
Operation Operating modes The following modes are available: – Warming cups and glasses – Warming dishes and plates – Keep Warm – Low temperature The next time the appliance is switched on, the previously selected operating mode will automatically appear on the control panel as the active setting. The drawer is equipped with a fan that distributes the warmed air within the drawer. The fan runs – continuously in the "Warm Cups/Glasses" and "Warm Dishes/Plates" modes.
Operation Temperature display Temperature °F/°C * 105 / 40 140 / 60 150 / 65 150 / 65 115 / 45 150 / 65 160 / 70 160 / 70 120 / 50 160 / 70 170 / 75 170 / 75 130 / 55 170 / 75 175 / 80 175 / 80 140 / 60 175 / 80 185 / 85 185 / 85 * approximate temperatures, measured in the center of an empty drawer 17
Keeping food warm The minimum temperatures for keeping food warm (150°F / 65°C) may not be exceeded. Use only the "Keep Warm" mode to ensure that the minimum temperature is maintained. This operating mode is designed to keep food warm immediately after it has been cooked, i.e. when it is still hot. It is not intended for reheating food that is cold. Select the mode. Select the desired time setting.
Keeping food warm Settings Food Cookware Cover dishes Temperature setting for Plate No Casserole dish Position Bottom Rack* x x Yes x Plate Yes x Casserole Pot Yes x Fish sticks Pan No x Meat in gravy / sauce Pot Yes x Vegetables in sauce Pot Yes x Stew Pot Yes x Mashed potatoes Pot Yes x Plate Yes x Plate / pot Yes x Breaded cutlets Pan No x Pancakes Plate No x
Warming dishes Tips Warming times – Distribute the dishware over the whole area of the drawer whenever possible. Stacks of plates heat up more slowly than individual pieces. If it is not possible to avoid large stacks of plates, place them at the front of the drawer. Use the rack (depending on the appliance model). Various factors will affect the warming times: – Do not place large serving dishes in front of the air vents in an upright position.
Warming dishes In the mode, it will take approximately – 30 - 35 minutes to evenly warm 6 place settings – 40 - 45 minutes to evenly warm 12 place settings As you continue to use the appliance, you will get to know which setting best fits your needs. Capacity The telescopic runners can support 55 lbs / 25 kg. Overloading the drawer will damage the runners. The quantity that can be loaded will depend to a great extent on the weight and size of your own dishware.
Warming dishes The following loading examples are intended to serve as a guide: 6 place settings 6 dinner plates 10 1/4" (26 cm) 6 deep soup plates 9" (23 cm) 6 dessert plates 7 1/2" (19 cm) 1 oval platter 12 1/2" (32 cm) 1 serving bowl 6 1/4" (16 cm) 1 serving bowl 5" (13 cm) Or one of the following arrangements: 12 dinner plates 10 1/4" (26 cm) 18 deep soup plates 9" (23 cm) 16 soup bowls 4" (10 cm) 6 dinner plates and 6 deep soup plates 10 1/4" (26 cm) 9" (23 cm)
Other uses Food Cookware Cover dishes [h:min] Defrosting berries Bowl / plate No 12:50 Dissolving gelatin Bowl No 12:15 Proofing Bowl Yes, with plate 12:30 Preparing yogurt Yogurt jars with lids – 5:00 Soaking rice pudding Pot Yes, with lid 12:40 Melting Chocolate Bowl No 12:20 Defrosting vegetables Bowl No 1:00 Temperature setting / Temperature setting / Duration 23
Cleaning and care Risk of injury! The steam from a steam cleaner could reach electrical components and cause a short circuit. Do not use a steam cleaner to clean the warming drawer. Unsuitable cleaning agents can discolor and damage the surfaces of the appliance. Only use liquid dish soap and warm water applied with a soft sponge or cloth. All surfaces are susceptible to scratching. Scratches on glass surfaces may cause a breakage. Immediately remove any residues left by cleaning agents.
Cleaning and care Cleaning the drawer front and interior The On/Off button must remain free of grime and liquids. Failure to keep the sensor button clean may cause it to become unresponsive or to switch uncontrollably. It is best to remove normal soiling immediately using a clean sponge and a solution of warm water and liquid dish soap or with a clean, damp microfiber cloth. Wipe with clean water afterwards. Cleaning the non-slip mat Do not clean the non-slip mat in the dishwasher or washing machine.
Frequently asked questions The following faults can be corrected without contacting the Miele Service Department. If in doubt, please contact Miele. Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. Do not attempt to open the warming drawer housing. Problem Possible cause and solution The drawer does not heat up. The plug is not properly inserted. Insert the plug.
Frequently asked questions Problem Possible cause and solution The dishes are too hot. The "Warm Dishes/Plates" or "Warm Cups/ Glasses" mode is not set. Set the correct operating mode. The temperature setting is too high. Select a lower temperature. Noise occurs during op- The noise is caused by the fan, which distributes the eration heat evenly throughout the drawer. The fan runs at intervals in the "Keep Warm" and "Low temperature" modes. This is not a fault.
Optional accessories Miele offers a range of useful accessories, as well as cleaning and conditioning products for your appliance. Depending on country, these can be ordered online from Miele. You can also obtain these products from Miele Service (see end of this booklet for contact details) or your Miele dealer. Non-slip mat For keeping dishware secure.
IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION WARNING - Read all instructions before installation or use of the steam oven to prevent injury and machine damage. Before connecting the appliance to the power supply, ensure that the connection data (voltage and frequency) on the data plate of the drawer match the electrical supply. This data must correspond in order to avoid the risk of damage to the warming drawer. Consult a qualified electrician if in any doubt.
Instructions for installation The combination appliance is placed on top of the drawer without the need for an interim shelf. The drawer is available in two models, which differ in height. The installation dimensions for the food warming drawer must be added to the installation dimensions for the combination appliance to establish the niche size required. All dimensions in this instruction booklet are given in mm and inches.
Installation dimensions ESW with H 2xxx B(P) / H 6xxx B(P) a Vent cut-out for when appliance is installed in combination with a self cleaning oven b Installation dimensions with plug Power cord L= 7' 2 5/8" (2200 mm) *) Glass front / **) Stainless steel front 31
Installation dimensions ESW with H 6xxx BM(BP) / M 61xx / M 62xx a Vent cut-out for when appliance is installed in combination with a self cleaning oven b Installation dimensions with plug Power cord L= 7' 2 5/8" (2200 mm) *) Glass front / 32 **) Stainless steel front
Installation dimensions ESW with DG 6x00 / DG 6x0x b Installation dimensions with plug Power cord L= 7' 2 5/8" (2200 mm) *) Glass front / **) Stainless steel front 33
Installation dimensions ESW with DGC 6500 / DGC 6600 / DGC 680x a Vent cut-out for when appliance is installed in combination with a combination steam cooker with oven b Installation dimensions with plug Power cord L= 7' 2 5/8" (2200 mm) *) Glass front / **) Stainless steel front For DGC 6805, cut-outs are required for the water supply and drain hoses (see the DGC 6805 installation instructions).
Installation dimensions ESW with CVA 6401 / CVA 68xx a Ventilation cut-out for installation in combination with a coffee machine b Installation dimensions with plug Power cord L= 7' 2 5/8" (2200 mm) *) **) Glass front / Stainless steel front In combination installations be sure that each appliance has its own dedicated electrical connection.
Installation The base of the drawer must be clean and level. This is important for appliance to function correctly. Push the drawer into the housing unit as far as the vapor strip and align it at a right angle. Open the drawer, and use the screws supplied (2 for the small drawer, 4 for the large drawer) to secure it to the side walls of the housing unit. Install the combination appliance in accordance with its own specific operating and installation instructions.
Electrical connection ATTENTION: Connection Before installation or servicing, disconnect the power supply by either removing the fuse, manually "tripping" the circuit breaker or unplugging the appliance. Pull the plug not the cord. Make sure that the connection data on the data plate (voltage, frequency, and fuse rating) matches that of your electrical supply. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Old electrical and electronic appliances often still contain valuable materials.
Technical service, data plate, warranty After sales service In the event of a fault which you cannot easily correct yourself, please contact: – your Miele dealer, or – the Miele Technical Service Department. See back cover for contact details. Please quote the model and serial number of your appliance when contacting Miele. Data plate Adhere the extra data plate supplied with the appliance here. Ensure that the model number is the same as the one on the back of these operating instructions.
MieleCare This service is available in USA only. MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory trained professionals can guarantee the safety, reliability, and longevity of your Miele appliance.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Germany Manufacturer Miele & Cie.
ESW 6114 / ESW 6214 en-US M.-Nr.
