Operating and Installation Instructions Warming drawer To prevent accidents and machine damage, read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 4 Overview............................................................................................................... 11 Included accessories............................................................................................. 12 Control panel ....................................................................................................... 13 Before first use ............................
Contents Electrical connection .......................................................................................... 36 Caring for the environment ................................................................................ 37 Technical Service................................................................................................. Contact in case of fault ......................................................................................... Data plate ...................................
IMPORTANT SAFETY INSTRUCTIONS This drawer conforms to current safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using the appliance for the first time. They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage occurring as a result of non-compliance with these instructions.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This drawer is intended for domestic use and use in other similar environments. The drawer is not intended for outdoor use. The warming drawer is intended for domestic use only as described in these instructions. All other use is at the owner's own risk and could be dangerous. Persons who lack physical, sensory or mental abilities, or experience with the appliance should not use it without supervision or instruction by a responsible person.
IMPORTANT SAFETY INSTRUCTIONS Safety with children As with any appliance, close supervision is necessary when used by children. Do not leave children unattended: Children should not be alone or unsupervised in the area where the appliance is installed. Do not allow them to sit or stand on the appliance. Be sure to supervise any children in the vicinity of the drawer, and do not let them play with it. The drawer gets hot when in use and remains hot for quite a while after being switched off.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and repairs must only be carried out by a Miele authorized technician. A damaged drawer can be dangerous. Always check for visible signs of damage. Never use a damaged appliance. Reliable and safe operation of the drawer can only be assured if it has been connected to the electrical supply.
IMPORTANT SAFETY INSTRUCTIONS Any repairs not performed by a Miele authorized service technician will void the warranty. Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer. If the plug has been removed or the power cord is not supplied with a plug, the drawer must be connected to the power supply by a suitably qualified electrician.
IMPORTANT SAFETY INSTRUCTIONS Correct use You can burn yourself on a hot warming drawer. When using the appliance, protect your hands by wearing heat-resistant pot holders. Only use dry pot holders. Wet or damp textiles conduct heat more effectively and produce steam, which poses a burn hazard. Fire hazard. Do not store any plastic containers or combustible objects in the warming drawer. They can melt or catch fire when the appliance is switched on.
IMPORTANT SAFETY INSTRUCTIONS Keeping Warm mode is to be used for keeping hot dishes warm, not for heating up cold food. Make sure that any food placed in the drawer is at a high enough temperature. In some foods, bacterial growth may occur if the temperature is too low. Set the appliance to an adequate warming temperature. Loose fitting or hanging garments present a fire hazard. Wear proper apparel while operating the appliance.
Overview a Non-slip mat c Air vents b Control panel d Dishwasher-safe rack 11
Overview Included accessories The accessories supplied with your appliance, as well as a range of optional ones, are available to order from Miele (see “Optional accessories”). Dishwasher-safe rack For increasing the loading area. Non-slip mat For keeping dishware secure.
Control panel Sensor buttons Sensor button Description On/Off button Menu Selects the operating mode Temperature Sets the temperature Duration Sets the duration Display Display Description Warm Cups/Glasses mode Warm Dishes/Plates mode Keep Warm mode Low Temperature mode Temperature display with segment bars 1h Duration of 1 hour 2h Duration of 2 hours 3h Duration of 3 hours 4h Duration of 4 hours 13
Before first use Please adhere the extra appliance data plate (supplied) in the space provided in the “After sales service” section of this manual. Remove any protective foil and stickers. Cleaning the drawer for the first time Remove the non-slip mat, if present, and the rack from the drawer and clean them with warm water and liquid dish soap, using a clean soft sponge or damp microfiber cloth. Dry the mat and the rack with a soft cloth.
Operation Basic operation The button must remain free of debris and liquids. Failure to keep the sensor button clean may cause it to become unresponsive or to switch uncontrollably. Liquids that get inside the drawer can cause a short-circuit. Open and close a loaded drawer carefully to prevent liquids from spilling. Open the drawer. Tap the button to switch on the drawer. Tap the “Menu” button repeatedly until the desired mode lights up.
Operation Operating modes The following modes are available: – Warming cups and glasses – Warming dishes and plates – Keep Warm – Low temperature The next time the appliance is switched on, the previously selected operating mode will automatically appear on the control panel as the active setting. The drawer is equipped with a fan that distributes the warmed air within the drawer. The fan runs – continuously in the “Warm Cups/Glasses” and “Warm Dishes/Plates” modes.
Operation Temperature display Temperature °F / °C * 105 / 40 140 / 60 150 / 65 150 / 65 115 / 45 150 / 65 160 / 70 160 / 70 120 / 50 160 / 70 170 / 75 170 / 75 130 / 55 170 / 75 175 / 80 175 / 80 140 / 60 175 / 80 185 / 85 185 / 85 * approximate temperatures, measured in the center of an empty drawer 17
Keeping food warm The minimum temperatures for keeping food warm (150°F / 65°C) may not be exceeded. Use only the “Keep Warm” mode to ensure that the minimum temperature is maintained. This operating mode is designed to keep food warm immediately after it has been cooked, i.e. when it is still hot. It is not intended for reheating food that is cold. Select the mode. Select the desired time setting.
Keeping food warm Settings Food Cookware Cover dishes Temperature setting for Plate No Casserole dish Position Bottom Rack* x x Yes x Plate Yes x Casserole Pot Yes x Fish sticks Pan No x Meat in gravy/ sauce Pot Yes x Vegetables in sauce Pot Yes x Stew Pot Yes x Mashed potatoes Pot Yes x Plate Yes x Plate/pot Yes x Breaded cutlets Pan No x Pancakes Plate No x Piz
Warming dishes Tips – Distribute the dishware over the whole area of the drawer whenever possible. Stacks of plates heat up more slowly than individual pieces. If it is not possible to avoid large stacks of plates, place them at the front of the drawer. Use the rack (depending on the appliance model). – Do not place large serving dishes in front of the air vents in an upright position. This will block the warm air outlets, and the plates and dishes will not warm evenly.
Warming dishes The following loading examples are intended to serve as a guide: 12 place settings 12 dinner plates 10 ¹/₄" (26 cm) 12 deep soup plates 9" (23 cm) 12 dessert plates 7 ¹/₂" (19 cm) 1 oval platter 12 ¹/₂" (32 cm) 1 serving bowl 7 ¹/₂" (19 cm) 1 serving bowl 6 ¹/₄" (16 cm) 1 serving bowl 5" (13 cm) Or one of the following arrangements: 40 dinner plates 10 ¹/₄" (26 cm) 60 deep soup plates 9" (23 cm) 45 soup bowls 4" (10 cm) 20 dinner plates 20 deep soup plat
Other uses Food Cookware Cover dishes Defrosting berries Bowl/plate No 12:50 Dissolving gelatin Bowl No 12:15 Proofing Bowl Yes, with plate 12:30 Preparing yogurt Yogurt jars with lids – 5:00 Pot Yes, with lid 12:40 Melting Chocolate Bowl No 12:20 Defrosting vegetables Bowl No 1:00 Soaking rice pudding Temperature setting / Temperature setting / Duration 22 [h:min]
Sabbath mode For the observance of religious rules, the drawer can be programmed for the duration of the Sabbath. It switches off automatically after 72 hours and normal mode is re-established. When this function is activated, the timer is deactivated and the buttons must be pressed for longer than usual. Activate Tap the “Duration” button and keep it pressed. While keeping the “Duration” button pressed, tap the button and keep it pressed.
Cleaning and care Risk of injury! The steam from a steam cleaner could reach electrical components and cause a short circuit. Do not use a steam cleaner to clean the warming drawer. Unsuitable cleaning agents can discolor and damage the surfaces of the appliance. Only use liquid dish soap and warm water applied with a soft sponge or cloth. All surfaces are susceptible to scratching. Scratches on glass surfaces may cause a breakage. Immediately remove any residues left by cleaning agents.
Cleaning and care Cleaning the drawer front and interior The On/Off button must remain free of grime and liquids. Failure to keep the sensor button clean may cause it to become unresponsive or to switch uncontrollably. It is best to remove normal soiling immediately using a clean sponge and a solution of warm water and liquid dish soap or with a clean, damp microfiber cloth. Wipe with clean water afterwards. Cleaning the non-slip mat Do not clean the non-slip mat in the dishwasher or washing machine.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Problem Possible cause and solution The drawer does not heat up. The plug is not properly inserted. Insert the plug. The circuit breaker has tripped.
Frequently Asked Questions Problem Possible cause and solution Noise occurs during op- The noise is caused by the fan, which distributes the eration heat evenly throughout the drawer. The fan runs at intervals in the “Keep Warm” and “Low temperature” modes. This is not a fault.
Optional accessories Miele offers a range of useful accessories, as well as cleaning and conditioning products for your appliance. These products can be easily ordered from the Miele webshop. These products can also be ordered from Miele Technical Service (see the end of these operating instructions) or your Miele dealer. Rack For increasing the loading area. Non-slip mat For keeping dishware secure.
IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION WARNING - Read all instructions before installation or use of the drawer to prevent injury and machine damage. Before connecting the appliance to the power supply, ensure that the connection data (voltage and frequency) on the data plate of the drawer match the electrical supply. This data must correspond in order to avoid the risk of damage to the warming drawer. Consult a qualified electrician if in any doubt.
Instructions for installation The combination appliance is placed on top of the drawer without the need for an interim shelf. The drawer is available in two models, which differ in height. The installation dimensions for the food warming drawer must be added to the installation dimensions for the combination appliance to establish the niche size required. All dimensions in this instruction booklet are given in mm and inches.
Installation dimensions Solo installation Side view a Protective base 31
Installation dimensions Installation with oven 32
Installation dimensions Side view with oven 33
Installation The base of the drawer must be clean and level. This is important for appliance to function correctly. Push the drawer into the housing unit as far as the vapor strip and align it at a right angle. Open the drawer, and use the 4 screws supplied to secure it to the side walls of the housing unit. Install the combination appliance in accordance with its own specific operating and installation instructions.
Attachment of the front panel for ESW 6380 FB The front panel must be at least ³/₄" (19 mm) thick and be temperatureresistant up to 140°F (60°C). The decorative front, including the handle, may not exceed a weight of 11 lbs. (5 kg). Screw the front panel of the drawer onto the decorative front. Fasten the handle to the front panel using countersunk screws. Unscrew the screws on the left and right sides of the drawer front and pull out the fascia panel carefully.
Electrical connection ATTENTION: Installer: Before installation or servicing, disconnect the power supply by either removing the fuse, manually “tripping” the circuit breaker or unplugging the appliance. Pull the plug not the cord. Please leave these instructions with the customer. Repairs and service by unqualified persons could be dangerous and the manufacturer will not be held responsible.
Caring for the environment Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Electrical and electronic appliances contain valuable materials.
Technical Service Contact in case of fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Technical Service. Contact information for Miele Technical Service can be found at the end of this document. Please quote the model and serial number of your appliance when contacting Miele. Both pieces of information can be found on the data plate. Data plate Adhere the extra data plate supplied with the appliance in the space below.
MieleCare This service is available in USA only. MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory trained professionals can guarantee the safety, reliability, and longevity of your Miele appliance.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
ESW 6380 / ESW 6380 FB / ESW 6580 / ESW 6680 / ESW 6780 / ESW 6880 en-US M.-Nr.
