Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Before first use
- Operation
- Keeping food warm
- Warming dishes
- Low temperature cooking
- Other uses
- Networking with Miele Built-in Appliances
- Sabbath mode
- Cleaning and care
- Frequently Asked Questions
- Optional accessories
- Customer Service
- MieleCare
- Installation
Operation
22
Using the appliance
Malfunction can occur due to
dirty and/or covered sensor buttons.
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor buttons and indica-
tors clean.
Do not place anything over the sen-
sor buttons or indicators.
Damage caused by liquids.
Liquids that get inside the drawer
can cause a short circuit.
Open and close a loaded drawer
carefully to prevent liquids from
spilling.
Open the drawer.
Touch the sensor control to switch
the drawer on.
Touch the sensor control repeat-
edly until the required operating
mode lights up.
Touch the sensor control repeat-
edly until the segment for the re-
quired temperature lights up in the
temperature display.
Touch the sensor control repeat-
edly until the required number of
hours for the operating time lights up.
Close the drawer.