Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Cleaning for the first time
- Operation
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Installation
Installation
*INSTALLATION*
55
Screw the air filter onto the vac-
uum pump using a screwdriver.
Secure the transit restraint to the
back of the drawer.
Slide the cover back over the
opening to close it.
Remove the safety screws from
the back of the drawer.
Oil may leak while transporting the
drawer.
Remove the air filter before trans-
porting the drawer and plug the vac-
uum pump with the transit re-
straint again.
To remove the air filter and install the
transit restraint, carry out these steps in
reverse order.