Operating and Installation Instructions

Operation
26
 Danger of injury caused by im-
plosion.
Damage to the glass lid can cause
implosion.
Do not under any circumstances use
the drawer if the glass lid is dam-
aged.
 Malfunction can occur due to
dirty and/or covered sensor buttons.
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor buttons and indica-
tors clean.
Do not place anything over the sen-
sor buttons or indicators.
 Damage caused by liquids.
Liquid getting into the vacuum pump
air-intake valve during a vacuum-
sealing process can result in damage
to the vacuum pump.
Fill the vacuum-sealing bag with liq-
uid to a maximum of ¹/₃.