Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Overview
- Cleaning for the first time
- Operation
- Cleaning and care
- Frequently Asked Questions
- Customer Service
- Installation
Installation
*INSTALLATION*
58
Aligning the front of the drawer
After installing the combination appli-
ance, it may be necessary under certain
circumstances to align the front of the
drawer and adjust the gap between the
drawer and the combination appliance.
For this purpose, 2screws can be
found behind the front of the drawer
which are used to fasten the front to the
housing of the drawer.
Open the drawer.
Loosen the retaining screws on the
right and left of the drawer housing.
Do not remove the screws com-
pletely, as the front may fall off.
Push the front of the drawer up or
down a little to correct the alignment
and the gap.
Tighten up the retaining screws.