Technical information

Technical Information
120
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Intake/Drain
Lt.
Function Programming Indication
Flashing Rhythm of
SaniWash LED
Long Short Long Short Display
- - P0
Press the Program
button 12x
To reset all
parameters to
factory setting,
press the Program
button and hold it
until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
The Intake/Drain
LED flashes 1x long
and 2x briefly
intermittently. With
this programming
function, all
parameters that can
be modified by the
customer can be
reset to the factory
setting.
If the SaniWash LED
is off, the values are
not at the factory
setting. If the
SaniWash LED
flashes, all values
correspond to the
factory setting.
- 1 P1
Pos. 12:
Reset to
factory
setting
1 2
Long Short
Long Short Display
- - P0
2 -
Pos. 20:
Set the
wash
temperatu
re
Press the Program
button 20x
To change the
setting, press the
Program button
and hold it until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
The Intake/Drain
LED flashes 2x long
intermittently.
The SaniWash LED
is off = normal wash
temperature; the
SaniWash flashes =
increased wash
temperature with a
resulting running time
extension.
- 1 P1
Table 6-11: G2170 Programming Mode Options (Cont. from Table 6-10) (Cont. on Table 6-12)