Technical information

Technical Information
122
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Intake/Drain
Lt.
Function Programming Indication
Flashing Rhythm of
SaniWash LED
Long Short Long Short Display
- - P0
Press the Program
button 26x.
To change the
setting, press the
Program button
and hold it until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
The Intake/Drain
LED flashes 2x
long and 6x briefly
intermittently.
The SaniWash
LED is off =
program cycle per
factory setting; The
SaniWash LED
flashes = second
interim rinse is
added.
Pos. 26:
Add second
interim rinse
2 6
- 1 P1
Long Short Long Short Display
- - P0
2
Press the Program
button 27x
Pos. 27:
Extended
drying time
7
To change the
setting, press the
Program button
and hold it until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
The Intake/Drain
LED flashes 2x
long and 7x briefly
intermittently.
The SaniWash
LED if off = normal
drying (factory
setting); the
SaniWash LED
flashes = enhanced
drying.
- 1 P1
Long Short Long Short Display
- - P0
3 6
Pos. 36:
Machine
height
setting *1
Press the Program
button 36x.
To change the
setting, press the
Program button
and hold it until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
The Intake/Drain
LED flashes 3x
long and 6x briefly
intermittently.
The SaniWash
LED is off = normal
machine height
(G1xxx). The
SaniWash LED
flashes = XXL units
(G2xxx).
- 1 P1
Long Short Long Short Display
- - P0
3 8
Pos. 38:
Model
variant
setting *1
Press the Program
button 38x.
To change the
setting, press the
Program button
and hold it until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
The Intake/Drain
LED flashes 3x
long and 8x briefly
intermittently.
The SaniWash
LED is off = Gx18x
and Gx171; the
SaniWash LED
flashes = Gx170
- 1 P1
Table 6-13: G2170 Programming Mode Options (Cont. from Table 6-12) (Cont. on Table 6-14)