Technical information

Technical Information
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Intake/Drain
Lt.
Function Programming Display
Flashing Rhythm of
Sani-Wash Lt.
Long Short Long Short Display
- - P0
1 2
Pos. 12:
Resetting
standard
settings *1
Press the
Program button
12 times. The
Rinse & Hold
LED flashes once
slowly and 2 times
rapidly
intermittently.
Press the
Start/Stop button
to reset all
standard settings.
The Rinse LED is off
or flashes. This
programmable
function can be used
to reset all
parameters that can
be modified by the
customer to the
standard settings: P0
= Non-standard
settings have been
made; P1 = All
settings reset to
standard settings or
no modifications have
been made.
- 1 P1
Long Short Long Short Display
- - P0
2 -
Pos. 20:
Wash
temperatu
re
modificatio
n (from
software
version ID
No. –984)
Press the Program
button 20 times.
The Rinse & Hold
LED flashes 2
times slowly
intermittently.
Press the
Start/Stop button
as appropriate to
make the desired
setting.
The Rinse LED is off
or flashes. Setting
options: P0 =
Standard setting; P1
= Wash temperature
increased. Due to a
program-dependent
running time
extension, the wash
temperature will be
increased.
- 1 P1
Long Short Long Short Display
- - P0
2 2
Pos. 22:
Program
running
time
reduction
(from
software
version ID
No. –984)
Press the Program
button 22 times.
The Rinse & Hold
LED flashes 2
times slowly and 2
times rapidly
intermittently.
Press the
Start/Stop button
as appropriate to
make the desired
setting.
The Rinse LED is off
or flashes: P0 =
Standard setting; P1
= Program running
time reduction.
- 1 P1
Table 6-18: G2140 Program Mode Options (Cont. from Table 6-17) (Cont. on Table 6-19)
131