Technical information

ManualsBrandsMiele ManualsDishwasherExcella G2732SCi

Technical Information

142

G1000 / G2000 Dishwashers

Flashing

Rhythm of

Intake/Drain

Lt.

Function Programming Indication

Flashing Rhythm of

SaniWash LED

Long Short Long Short Display

- - P0

1 2

Pos. 12:

Reset to

factory

setting

Press the

Program button

12x

To reset all

parameters to

factory setting,

press the

Program button

and hold it until

the Intake/Drain

LED flashes.

Then press the

Program button

to enter the

desired setting

changes. *2

The Intake/Drain

LED flashes 1x long

and 2x briefly

intermittently. With

this programming

function, all

parameters that can

be modified by the

customer can be

reset to the factory

setting.

If the SaniWash LED

is off, the values are

not at the factory

setting. If the

SaniWash LED

flashes, all values

correspond to the

factory setting.

- 1 P1

Long Short Long Short Display

-

- P0

2 -

Pos. 20: Set

the wash

temperature

Press the

Program button

20x

To change the

setting, press the

Program button

and hold it until

the Intake/Drain

LED flashes.

Then press the

Program button

to enter the

desired setting

changes. *2

The Intake/Drain

LED flashes 2x long

intermittently.

The SaniWash LED

is off = normal wash

temperature; the

SaniWash flashes =

increased wash

temperature with a

resulting running time

extension.

- 1 P1

Table 6-25: G1180 / G2180 Programming Mode Options (Cont. from Table 6-24) (Cont. on Table 6-26)