Technical information

Technical Information
G1000 / G2000 Dishwashers
Options
Refer to Tables: 6-44 through 6-48.
Function Programming Display
Use the cursor buttons as
appropriate to select Reset,
then press the OK button. Use
the cursor buttons to make the
desired setting.
This programmable function can
be used to reset all parameters
(both customer and service
programming) to the standard
settings.
Pos. 1: Reset
Use the cursor buttons as
appropriate to select
Language, then press the OK
button. Use the cursor buttons
to make the desired setting.
The display shows the available
options.
Pos. 2: Language
setting
Use the cursor buttons as
appropriate to select Time…,
then press the OK button. Use
the cursor buttons to make the
desired setting.
Display options: 24 h Clock or 12
h Clock. After selection, the
display changes to the
appropriate time indication.
Pos. 3: Time of
day setting
Use the cursor buttons as
appropriate to select Tab type
or Detergent type (from
software version ID no.984),
then press the OK button. Use
the cursor buttons to make the
desired setting.
The display shows the following
options for the detergent type:
Normal (powder detergent) 2 in
1, 3 in 1 or Liquid detergent
(from software version ID no.
984).
Pos. 4: Tab type
or detergent
setting
1)
Use the cursor buttons as
appropriate to select Rinse aid,
then press the OK button. Use
the cursor buttons to make the
desired setting.
The display shows the current
rinse aid dispensed quantity
setting. Setting range: 0 ml – 6
ml. Standard setting: 3 ml.
Pos. 5:
Dispensed rinse
aid quantity
setting
Use the cursor buttons as
appropriate to select Check
filters, then press the OK
button. Use the cursor buttons
to make the desired setting.
The display shows the number of
wash programs between filter
checks. Setting range: 30 – 60
wash programs.
Pos. 6: Interval
between filter
checks setting
Table 6-44: G2630 Programming Mode Options (Continued on Table 6-45)
173