Technical information

Technical Information
G1000 / G2000 Dishwashers
Function Programming Display
Select Temperature. Make the
desired selection and confirm
with the OK button.
The options °C and °F are available Temperature
setting
Select Buzzer. Make the
desired selection and confirm
with the OK button.
The display shows the options Off,
Normal and Loud
Buzzer
activation /
deactivation and
volume setting
Select Keypad tone. Make the
desired selection and confirm
with the OK button
Audible
confirmation
signal activation
/ deactivation
An audible confirmation signal when a
button is pressed is active as standard.
This is indicated in the display by On. If
the function is not desired, select Off
Select Brightness. Press the
Dimmer or Brighter buttons as
appropriate to make the
desired selection and confirm
with the OK button
Brightness
setting
The display brightness range has 17
steps shown in bar form. Standard
setting: 8.
Select Memory. Make the
desired selection and confirm
with the OK button.
The display shows the options On
(standard setting) and Off. The
memory function can be used to save
the most recently selected program.
Memory
activation /
deactivation
Select Dealer. Make the
desired selection and confirm
with the OK button.
The display shows the options Demo
program, Demo in cont. loop and
Demo with sound. In addition the
option Off is available to deactivate the
mode.
Dealer
demonstration
mode activation.
Select Factory default. If all
parameters that can be
modified by the customer
(extras and settings) should be
reset to the standard settings,
press the OK button.
The display shows Reset factory
default settings?
Factory Default
Select Temperatures then
select the desired sub-menu.
The display shows the options Main
wash and Final rinse. This increases
the main wash or final rinse
temperature with a running time
extension.
Wash/Final rinse
temperature
modification
(from software
version ID no.
984).
The display shows the options Normal
and Increased
Main wash Make the desired selection and
confirm with the OK button
The display shows the options Normal
and Increased
Final rinse Make the desired selection and
confirm with the OK button
Table 6-51: G2670 Program Mode Options (Cont. from Table 6-50) (Cont. on Table 6-52)
185