Technical information

Technical Information
186
G1000 / G2000 Dishwashers
Function Programming Display
Select Water plus. Make the
desired selection and confirm
with the OK button
The display shows the options
Normal and Increased
Water-Plus quantity
normal / increased
Select Water hardness. Make
the desired selection and
confirm with the OK button
Automatic = sensor softener
activated. Alternatively the on-site
water hardness can be directly
selected. Setting range: 1°d to 70°d
(°d = Degree of German hardness).
Sensor softener
activation /
deactivation, water
hardness manual
setting
Program running
time reduction
(from software
version ID no. -984)
Select Shorten the program.
Make the desired selection and
confirm with the OK button.
The display shows the options On
and Off (standard setting). This
offers a program dependent running
time reduction by reducing
temperatures and/or canceling
holding times.
Second interim
rinse selection
(from software
version ID no. 984)
Select 2nd interim rinse. Make
the desired selection and
confirm with the OK button
The display shows the options On
and Off (standard setting)
Machine height
setting *1
Select Appliance height. Make
the desired selection and
confirm with the OK button
The display shows the options
Normal (G 1xxx) and XXL (G2xxx)
Country variant
setting *1
Select Country version. Make
the desired selection and
confirm with the OK button
Setting options: EUR = Europe,
AUS = Australia, USA, JPN =
Japan, I/E = Italy/Spain, SER =
Southern Europe *2
Model variant
setting *1
Select Model type. Make the
desired selection and confirm
with the OK button
On models with salt container in the
door (SIT) (e.g. G1870, G2870) this
option must be set to VI7. If the
dishwasher does not have a salt
container in the door (SIT), VI5
must be selected.
Table 6-52: G2670 Programming Mode Options (Continued from Table 6-51)
*1 If the electronic unit is exchanged during service work, it must be programmed as
follows: First set the country variant and model variant, then switch off the unit,
repeat the accessing procedure and set the machine height.
*2 The SER variant includes the following countries: Portugal, France, Netherlands,
Belgium and Great Britain.
*3 From software version ID no. 984 the display Tab type has been superseded by
Detergent type.
Save and quit
Switch off the unit.