Technical information

Technical Information
40
G1000 / G2000 Dishwashers
Note
When selecting the function “2in1” or “3in1”, impulses dispense rinse aid
(1 ml), to slowly empty the dispensing chamber. This is necessary since
rinse aid remnants, depending on their chemical composition, can clump,
or separate, under certain temperature and storage conditions.
The additional rinse aid dispensed as the chamber is being emptied has a
positive effect on the drying result. So if the drying result deteriorates after
some time of washing with combination products, it might be that all rinse
aid remnants have been flushed from the detergent chamber.
Warning
The 3 in 1 function may not be selected if the water hardness level is above
26 gr/gal. The detergent manufacturer’s instructions must be followed.
Note
If detergent tabs are used which contain other components in addition to
rinse aid and salt replacement (such as glass care, stainless steel shine,
etc.), select function “3in1”.