Technical information

Technical Information

G1000 / G2000 Dishwashers

Note

For the G1000 and G2000 series, green restrictors (4.1 l/min) must be

fitted in the WaterProof System valve holder.

1. Shut off the water supply.

2. Disconnect the WPS at the plumbing supply connection.

3. Remove the sealing washer and filter from inside the WPS connection. Using a

5mm nut-driver; press and tilt the restrictor to the side; as shown in Figure 5-26.

4. Remove the Restrictor - Figure 5-27.

5. Install the new restrictor using a suitable 5 mm socket / nutdriver to seat it firmly

and evenly into place. Re-install the filter and sealing washer.

Figure 5-26: Tilting the Flow Restrictor

Figure 5- 27: Removing the Flow Restrictor.

5.4.2 WaterProof System (WPS) - Removal

Note

In the event the intake hose or water valves require replacement,

the WPS must be replaced as a complete assembly. Individual

replacement of the parts is not possible.