Operating instructions/Installation instructions

Problem solving guide
39
Display warnings
Message Cause and remedy
The  symbol lights up
in the display. You can-
not switch the appli-
ance off.
The safety lock has been activated.
 Completely deactivate the safety lock (see “Select-
ing further settings – Activating and deactivating
the safety lock”).
Two bars are flashing in
the display.
A temperature will not be shown in the display until
the temperature in the appliance drops below 0°C.
 Check the temperature in the display about 6
hours after switching the appliance on.
The alarm symbol
and the temperature
display are flashing.
The temperature in the appliance is too warm or too
cold.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed
in the freezer without switching on the Super-
Freeze function.
– A prolonged power cut (mains outage) has oc-
curred.
 Rectify the cause of the alarm. The alarm sym-
bol will go out.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.