Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
Installation
*INSTALLATION*
51
Fit the appliance door from below up
onto the upper hinge pin and then
close the appliance door.
Fit the hinge bracket from below
into the lower door bearing and screw
it on tight.
The appliance door can be aligned
using the long slots in the hinge
bracket. Ensure that all screws have
been properly tightened.
Changing over the door handle
Carefully remove the cap and
stoppers from the sides.
Be careful not to let the tool slip out
and damage the appliance surface.
Slide the cover over to the left and
then insert a suitable plastic or
wooden tool into the gap on the
right hand side.
Carefully lever the cover off.