Operating and Installation instructions

Frequently Asked Questions
109
Message Possible cause and solution
The temperature display
is dark and the sym-
bol is shown on the dis-
play.
The Sabbath Mode function is switched on. The in-
terior lighting is switched off and the refrigeration ap-
pliance is cooling down.
 You can switch off Sabbath mode at any time (see
“Selecting additional settings – Switching Sabbath
Mode on or off”).
“F Please contact Miele
Technical Service.” ap-
pears in the display and
an alarm sounds.
There is a fault.
 Make a note of the fault message if necessary.
 Contact Miele Service.
 To turn the alarm off, touch the symbol.
The error message does not disappear from the dis-
play until the error has been rectified.
The voltage level is too high/low.
 Observe the connection data under “Electrical
connections”.
 Contact Miele Service if necessary.
 To turn the alarm off, touch the symbol.
The error message does not disappear from the dis-
play until the error has been rectified.
 is shown in the dis-
play. The machine does
not get cold, but the
machine controls are
working.
Demo Mode  is switched on. Demo mode allows the
appliance to be presented in the showroom without
the cooling system being turned on. Do not activate
this setting for domestic use.
 Switch off Demo mode  (see “Selecting additional
settings”, section “Switching off Demo Mode ”).