Operating instructions/Installation instructions

Problem solving guide
110
Problem Cause and remedy
Water is flowing out of
the refrigeration appli-
ance.
The water inlet is faulty.
 Close the stopcock immediately.
 Check whether the water line is damaged.
 Contact the Miele Customer Service Department.
 Check whether the water pressure is too high.
If the water pressure is too high, this can cause leaks
(see “Mains water connection” in ”Installation”).
 Check whether the water pressure is between
200kPa and 800kPa (2bar and 8bar).
 Check whether an incorrect valve has been in-
stalled.