Operating instructions/Installation instructions

Selecting additional settings
78
Switching on, switching off or
resetting theWater filter dis-
play
Depending on the quantity of ice cubes
produced, the Water filter display will re-
mind you approx. every 6months that
the IntensiveClear mesh filter has to be
cleaned. Clean the water filter appears on
the display.
See “Water filter (IntensiveClear mesh
filter)” in “Cleaning and care” for in-
structions on how to clean the water fil-
ter (IntensiveClear mesh filter).
The first time the mesh filter needs to
be cleaned, the display will remind you
automatically; the reminder does not
need to be switched on separately.
Switching the Water filter display
on
If theWater filter display has been
switched off, it must be switched on
again if required.
 In Settings mode, use the
and sensor controls to selectWater
filter display and selectOK to confirm
your selection.
 Use the and sensor controls to
select On and select OK to confirm
your selection.
The Water filter display is now switched
on.
Switching the Water filter display
off
 In Settings mode, use the
and sensor controls to selectWater
filter display and selectOK to confirm
your selection.
 Use the and sensor controls to
select Off and select OK to confirm
your selection.
TheWater filter display has been switched
off.