Operating and Installation instructions

Accessories
49
Accessories supplied
Appliance plug
Water filter (IntensiveClear 2.0 char-
coal filter)
The IntensiveClear 2.0 charcoal filter,
which is already installed in the refriger-
ation appliance, improves the taste and
smell of the ice cubes by removing
chlorine and other substances from
supply water.
However, to ensure the highest quality
of the ice cubes, it is essential to
change the water filter (IntensiveClear
2.0 charcoal filter) regularly.
Toe-kick cover in stainless steel look
The toe-kick cover in stainless steel
look ensures a uniform stainless steel
appearance.
Optional accessories
A range of useful Miele accessories and
care products are available for your ap-
pliance.
Water filter (IntensiveClear 2.0 mesh
filter)
The IntensiveClear 2.0 mesh filter filters
supply water for making ice cubes.
If an external water filter is attached to
your household water supply, you can
use an IntensiveClear 2.0 mesh filter in
place of an IntensiveClear 2.0 charcoal
filter.
Unlike the IntensiveClear 2.0 charcoal
filter, the IntensiveClear 2.0 mesh filter
does not need to be replaced, just
cleaned.
Water filter (IntensiveClear 2.0 char-
coal filter)
See “Accessories supplied” for a de-
scription.
Side-by-side installation kit and Top
Frame
To install two or more refrigeration ap-
pliances next to one another, you will
need the side-by-side installation kit
(see “Installation – Side-by-side”).
You also need a cover (Top Frame KTF)
to connect the appliances and to cover
the gap above the tops of the appli-
ances.
Hinge pocket
If the door hinging needs to be changed
on your refrigeration appliance, the up-
per toe-kick ventilation grille must be
converted. A new hinge pocket is re-
quired in order to do this.
The door hinging must only be replaced
by Miele Technical Service.
Accessories are available to order via
the Miele Webstore, from Miele di-
rectly (see back cover for contact de-
tails) or from your Miele dealer.