Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super freeze
- Temperature alarm
- Selecting further settings
- Freezing and storing food
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- Installation
- Installation
- Location
- Climate range
- Ventilation
- Top ventilation gap
- Furniture door panel
- Horizontal and vertical gaps
- – Horizontal gap
- – Vertical gap
- Weight of the furniture door
- Fitting large or divided furniture doors
- Before installing the appliance
- Does your old appliance have a different hinging mechanism?
- Stainless steel front
- Building-in dimensions
- Changing the door hinging
- Installing the appliance
- Electrical connection
- Installation
Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
59
Securing the refrigeration appliance
in the niche
Press the appliance against the side
of the housing unit on the hinge side.
Screw the chipboard screws
through the hinge plates at the top
and bottom to secure the appliance
to the housing unit.
Push the loose fixing brackets against
the housing unit wall.
Secure the fixing bracket to the
housing unit side wall with the
screw.
Tip: Pre-drill the hole.
The appliance must not pull back
into the unit, as otherwise the gap of
42mm will not be maintained all the
way round.
Using your thumb, push the protrud-
ing bracket towards the housing unit
wall whilst tightening the screws.
Secure the fixing bracket to the
housing unit side wall with the
screws.
Tip: Pre-drill the holes.
Re-tighten screws and .