User Guide and Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the freezer 8
- Before use 10
- Settings 11
- Temperature and door alarm 14
- Setting the temperature 15
- Using the freezer efficiently 17
- SuperCool 20
- Ice cube maker 21
- Automatic defrost 22
- Adjusting the interior fittings 23
- Cleaning and care 25
- Water filter 30
- Lead free certificate 35
- Frequently asked questions 36
- After sales service 42
- Caring for the environment 44
- Installation 45
- Dimensions 50
- Installing the appliance 53
- Plumbing 65
- Electrical connection 68
- RemoteVision (optional accessory) 69
- Contact details 75
MasterCool control panel options for RemoteVision
Status indicators Description of function
Flashing ; ~ Module booting phase
Flashing ; ‡ Not connected to network
Flashing ; | Connection to network established, no IP address
assigned
Solid ; # Connected to network
Flashing ;< In Ad-Hoc Mode, not connected
Flashing ;= In Ad-Hoc Mode, connected
Selectable
options
Description of function
; - Back
; 2 Reboot the module
; 3 Reset to factory settings
; 4 Enter Ad-Hoc Mode
Note: If you cannot select any option (other than ; - "Back", the module has not
been installed correctly.
RemoteVision (optional accessory)
71