User Guide and Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the freezer 8
- Before use 10
- Settings 11
- Temperature and door alarm 14
- Setting the temperature 15
- Using the freezer efficiently 17
- SuperCool 20
- Ice/Water Dispenser 21
- Automatic defrost 27
- Adjusting the interior fittings 28
- Cleaning and care 30
- Water filter 36
- Lead free certificate 41
- Frequently asked questions 42
- Causes of noises 48
- After sales service 49
- Caring for the environment 52
- Installation 53
- Installing the appliance 62
- Before you begin 62
- RemoteVision module installation 65
- Preparing the installation niche 66
- Sliding the appliance into the installation niche 70
- Aligning the appliance 71
- Attaching the appliance to the installation niche 72
- Preparing the custom door 74
- Attaching and aligning the custom door front 76
- Aligning the Ice/Water Dispenser 79
- Attaching the frame and the shelf 81
- Plumbing 82
- Electrical connection 85
- RemoteVision (optional accessory) 86
- Contact details 91
Settings
The following settings on the Ice/Water
dispenser can be adjusted:
Entering the settings mode
^
Touch and hold the "lock" button so
that it appears white.
^ At the same time tap the "light" button
(do not hold down).
^ Hold the "lock" button for approx. 4
seconds until the "lock" and "light"
buttons turn yellow.
The lighting color of other buttons
indicates their On/Off setting.
Yellow (On)
White (Off)
^
Release both buttons.
Anti-condensation heater
A heater behind the control panel of the
Ice/Water dispenser ensures that frost
and ice do not build-up. To save
energy, you can turn the heater off.
This feature is turned off by factory
default.
To turn the anti-condensation heater on:
^ Touch the "water" button until it turns
yellow.
Ice/Water Dispenser
25