User Guide and Installation Instruction

The drip tray, outlet, rear wall and
casing of the ice/water dispenser are
coated with a high-quality finish. This
coating protects them from soiling
and makes cleaning easier.
Do not treat the drip tray, outlet, rear
wall and casing of the ice/water
dispenser with stainless steel
cleaning agents, they will damage
the coating. Stainless steel
conditioners will leave visible
streaks!
Do not clean the drip tray and outlet
of the ice/water dispenser in the
dishwasher. This will damage the
coating.
Do not attach any magnets. The
surface is susceptible to scratches.
Do not use sticky notes, or any type
of tape or adhesive on the coated
surface. These will damage the
surface, causing it to lose its dirt
repellent protective coating.
Remove any soiling immediately if
possible. If soiling is left untreated, it
may become impossible to remove
and the surface may show changes
or discoloration.
Before cleaning
^
Use the main switch to turn the
appliance off completely.
The main switch is located on the right
side underneath the control panel.
^
Unplug the power cord.
^
Remove any food from the appliance
and store it in a cool place.
^ Take out any removable parts,
e.g., shelves, baskets.
Cleaning the interior and
accessories
Use a mild solution of warm water and
liquid dish soap. Wash all accessories
and drawers by hand. Do not wash in a
dishwasher.
^
Clean the appliance as needed.
^
After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance door open for a
short time, so the moisture can
evaporate.
Cleaning and care
31