User Guide and Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the freezer 8
- Before use 10
- Settings 11
- Temperature and door alarm 14
- Setting the temperature 15
- Using the freezer efficiently 17
- SuperCool 20
- Ice/Water Dispenser 21
- Automatic defrost 27
- Adjusting the interior fittings 28
- Cleaning and care 30
- Water filter 36
- Lead free certificate 41
- Frequently asked questions 42
- Causes of noises 48
- After sales service 49
- Caring for the environment 52
- Installation 53
- Installing the appliance 62
- Before you begin 62
- RemoteVision module installation 65
- Preparing the installation niche 66
- Sliding the appliance into the installation niche 70
- Aligning the appliance 71
- Attaching the appliance to the installation niche 72
- Preparing the custom door 74
- Attaching and aligning the custom door front 76
- Aligning the Ice/Water Dispenser 79
- Attaching the frame and the shelf 81
- Plumbing 82
- Electrical connection 85
- RemoteVision (optional accessory) 86
- Contact details 91
Ventilation slits
^
Check the ventilation slits in the base
panel regularly. Remove any
dirt/dust with a vacuum cleaner or
brush. Clean as needed.
Door seals
Do not use any oils or grease on the
door seals. This may cause the
seals to deteriorate and become
porous over time.
^
Clean the door seals with warm water
and dry thoroughly.
After cleaning
^
Return all shelves and accessories.
^
Plug in the appliance and turn it on
with the main switch.
^
Switch on the SuperCool function.
The freezer section will cool down
quickly.
^
Once the temperature is cold
enough, place the freezer baskets
containing the frozen food into the
freezer.
^
Turn off the SuperCool function on a
temperature of 0 °F (-18 °C) is
reached.
Cleaning and care
33