User Guide and Installation Instruction
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the freezer 8
- Before use 10
- Settings 11
- Temperature and door alarm 14
- Setting the temperature 15
- Using the freezer efficiently 17
- SuperCool 20
- Ice/Water Dispenser 21
- Automatic defrost 27
- Adjusting the interior fittings 28
- Cleaning and care 30
- Water filter 36
- Lead free certificate 41
- Frequently asked questions 42
- Causes of noises 48
- After sales service 49
- Caring for the environment 52
- Installation 53
- Installing the appliance 62
- Before you begin 62
- RemoteVision module installation 65
- Preparing the installation niche 66
- Sliding the appliance into the installation niche 70
- Aligning the appliance 71
- Attaching the appliance to the installation niche 72
- Preparing the custom door 74
- Attaching and aligning the custom door front 76
- Aligning the Ice/Water Dispenser 79
- Attaching the frame and the shelf 81
- Plumbing 82
- Electrical connection 85
- RemoteVision (optional accessory) 86
- Contact details 91
Side lighting
^
Turn the light cover counterclockwise
and pull out.
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold with a soft cloth.
^
Pull the defective light bulb from the
socket.
^
Place the new bulb in the socket.
Halogen bulb type:
5 W/12 V/socket G 4.
^
Put the light cover back on and turn
clockwise into place.
^
Restore power to the appliance.
Ice/Water Dispenser lighting
Do not remove the light cover for the
dispenser lighting. Should the
lighting covers be damaged or need
to be removed due to damage, do
not look directly or with an optical
instrument at the lighting.
The lighting automatically switches off if
the dispenser is not used for an
extended period of time. This is not a
fault.
If the light does not come on when the
dispenser is used again, the light bulb
should be changed.
The dispenser lighting should only
be repaired or replaced by Miele
Technical Service.
Cleaning and care
35