Spec Sheet

Fully Integrated
18” MasterCool II
Please note the following:
• This specication sheet is for a single built-in unit.
• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit specication sheet.
*If design calls for a partition less than 6
5
/16” (160 mm) the left unit’s cutout will require an additional
1
/8” (3 mm) to the width to allow installation of
the Heating Mat/Merge Kit.
SPECIFICATIONS
Overall Unit Dimensions 17
3
/4” (451 mm) W x 83
3
/4”- 85
3
/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel]
Niche
Minimum Cabinet Niche Opening 18” (458 mm) W* x 84” - 85
3
/16” (2134 - 2164 mm) H x 24
3
/4” (629 mm) D
Interior Volume F 24x1 Vi
Freezer Volume *
Electrical
F 24x1 Vi
Electrical Requirements
110V / 120V, 60Hz, 15 Amps
In the case of side-by-side installations, a separate outlet must be used for each appliance.
Power Cord NEMA 5-15 plug, 5 ft (1.52 m)
Plumbing F 24x1 Vi
Water Supply Requirements
Connect to a cold water supply only. Do not connect to a low-mineral or a reverse osmosis system. Must be
connected to a shut-off valve. The water shut-off valve must be accessible after installation. The water pressure
must be between 29 psi (2 bar) and 116 psi (8 bar). If the pressure is higher than 120 psi (8.3 bar), a pressure
reducing valve must be installed.
Water Connection Line
Standard 1/4” O.D flexible water line. The maximum outer diameter of the water pipe (without fittings): 3/8” (10
mm). Water line is not included.
Shipping
F 2411 Vi F 2461 Vi / F 2471 Vi
Shipping Weight 306 lbs (139 kg) 328 lbs (149 kg)
Shipping Dimensions 21
1
/16” (535 mm) W x 84
1
/4” (1,240 mm) H x 29
7
/8” (759 mm) D
Support
Call Miele
[phone]
Miele Website
8www.miele.ca
20/20 Link
82020technologies.com
F 2411 Vi (Left Hinged)
Page 2 of 9
F 2461 Vi (Right Hinged)
F 2471 Vi (Left Hinged)