Installation Instructions

Selecting additional settings
58
If the SuperFrost function is switched
on, these will be automatically switched
off whenEco Mode is selected.
In settings mode, use the and
arrow buttons to selectEco Mode and
selectOK to confirm your selection.
Use the and arrow buttons to
switchEco Mode On, orOff and con-
firm your selection withOK.
The change in temperature to 3°F
(-16°C) on the display is the only indica-
tion that Eco Modeis switched on.
Tip: You can also switch off the Eco
Modefunction by directly adjusting the
temperature (see “Setting the temper-
ature” in “The correct temperature”).
Health risk caused by decom-
posing food.
The usability and quality of food may
deteriorate if the temperature re-
mains above 0°F (-18°C) for an ex-
tended period.
Only ever switch on theEco Mode
function for a limited period.
When switching to Eco Mode, check
that the food in the Freezer Zone is
already properly frozen.
Do not freeze any new food while
theEco Mode function is switched
on.
Performing a Self Test
Perform a Self Test if you are concerned
that your appliance is not working prop-
erly and want to check if it is suffering
from any problems.
In settings mode , use the and
arrow buttons to select Self Test and
select OK to confirm your selection.
Touch the sensor control if you
wish to terminate the process.
The Self Test starts and the appliance is
checked for any faults or malfunctions.
The message System Restarting ap-
pears in the display if the Self Test
does not discover any faults or mal-
functions.
If the Self Test does discover any
faults or malfunctions, they are indi-
cated as error messages in the dis-
play.
An alarm also sounds.
If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the sensor control .
Make a note of the error message(s)
displayed.
Contact Technical Service and inform
them of the error message(s) on the
display.
Confirm the message with OK.
System Restarting appears in the display.
The appliance briefly switches off and
then back on automatically.
Self test completed appears in the dis-
play.
Confirm the message with OK.
The main screen appears on the display
again.