Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Securing the toe-kick board and cover
- Aligning the appliance door
- Aligning the Ice/Water dispenser
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Operating the Ice/Water dispenser
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Copyrights and licenses
118
Miele uses their own and third party software which is not subject to any so-called
open source license for the operation and control of the device/appliance. This
software/these software components are protected by copyright. The copyright
powers of Miele and third parties have to be respected.
Furthermore, this device/appliance contains software components which are dis-
tributed under open source license conditions. Please refer to the document
“Open Source Information and Licenses” for the Open Source components con-
tained therein, together with the corresponding copyright notices, copies of the li-
censing conditions valid at the time, and any further information. The liability and
warranty provisions of the open source licensing conditions as stated therein apply
only in relation to the respective rights holders.
In particular, the device/appliance contains software components licensed by the
copyright holders under the GNU General Public License, Version 2, or the GNU
Lesser General Public License, Version 2.1. For a period of at least 3 years from
the date of purchase or delivery of the device/appliance respectively, Miele offers
to provide you or third parties with a machine-readable copy of the source code of
the Open Source components contained in the device/appliance and licensed un-
der the terms of the GNU General Public License, Version 2, or the GNU Lesser
General Public License, Version 2.1, on a data carrier (CD-ROM, DVD or USB
stick). Please contact us via e-mail (info@miele.com) or the below postal address
and state the product name, the serial number and the date of purchase to obtain
this source code.
Miele & Cie. KG
Open Source
GTZ/TIM
Carl-Miele-Straße 29
33332 Gütersloh
Please note the limited warranty in favor of the rights holders under the terms of
the GNU General Public License, Version 2, and the GNU Lesser General Public Li-
cense, Version 2.1:
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY, without even the implied warranty of MERCHANTABILITY of FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License and GNU
Lesser General Public License for more details.