Operating Instructions

Installation
*INSTALLATION*
38
 Unscrew the angle trims from both
sides of the appliance door and place
the trims and screws to one side –
they will be required later.
 Close the appliance door.
 Measure the gapX between the
mounting frame and the upper edge
of the adjacent cabinet front.
 Remove the nuts and washers
from the threaded bolts and store
them in a safe place – they will be re-
quired later.
 Take the mounting frame off the
appliance door by removing it up-
wards.
 Place the cabinet front on a firm sur-
face, with the external side facing
downwards (place on a blanket or
similar to avoid it becoming
scratched).
 Mark the distanceX-1/8" (3mm) on
the inner side of the cabinet front.
 Similarly, locate and mark the mid-
pointY on the cabinet front.