Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Aligning the Ice/Water dispenser
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Operating the Ice/Water dispenser
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Cleaning and care
103
Interior and accessories
Clean the appliance regularly, or at
least once a month.
Clean up any spills, stains, or food
immediately. Do not allow them to
dry and stick to the appliance.
Clean the appliance with a solution of
lukewarm water and liquid dish soap.
Rinse all parts by hand. Do not wash
in a dishwasher.
After cleaning, wipe with clean water
and dry with a soft cloth.
Leave the door open to air the appli-
ance sufficiently for a short while and
to prevent odor buildup.
Aluminum frames
The frames to the shelves inside the ap-
pliance and the door shelves are par-
tially made from aluminum.
Aluminum is a dynamic material. The re-
flection and appearance of aluminum
changes in different lights and environ-
ments and depending on the angle you
observe it from. It is also susceptible to
scratching.
The aluminum frames may become
discolored or damaged if soiling is left
on for too long. Remove any soiling
immediately.
Cleaning and emptying the ice
container
Clean the ice container regularly.
This ensures that fresh ice cubes are
always produced.
Empty the ice container on a regular
basis. This prevents ice cubes from
freezing together.
The ice container is very heavy when
full. Pull it out using both hands.
Open the appliance door.
Lift the ice container with both hands
and pull it forward to remove it from
the appliance.
Empty it and rinse it with warm water.
Dry the container thoroughly so that
new ice cubes will not freeze onto the
surfaces.