Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Aligning the Ice/Water dispenser
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Operating the Ice/Water dispenser
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Frequently Asked Questions
119
Problems with the ice/water dispenser
Problem Possible cause and solution
The Ice/Water dis-
penser cannot be
switched on.
The appliance is not connected to the power supply.
Check that the appliance is connected to the elec-
tricity supply.
The system lock of the Ice/Water dispenser is active
(the sensor control is highlighted in white).
Switch off the system lock (see “Operating the Ice/
Water dispenser – Switching the system lock on/
off”).
The ice/water dispenser
is not immediately
ready for operation af-
ter having been
switched on.
This is not a fault. After the appliance door has
opened and closed, it can take several seconds un-
til the ice/water dispenser is ready for operation.
No ice cubes are dis-
pensed.
The Ice/Water-dispenser spout is blocked by frozen
ice.
Remove the ice that has clumped together.
Empty the ice container at the latest if you have
not produced any ice for a week (see “Emptying
and cleaning the ice container” in “Cleaning and
care”).
After the Ice/Water dispenser has been switched on,
it can take up to 24hours until the first serving of ice
cubes is ready.
The chilled water from
the Ice/Water dispenser
does not taste good.
If you dispense chilled water again after a longer pe-
riod of time, it may be stale.
In this case, pour out the first 15glasses of water.