Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Aligning the Ice/Water dispenser
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Operating the Ice/Water dispenser
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
23
Dimensions when the appliance door is open (opening angle 115°)
3/8" (10 mm)
D
A
B
C
A B* C* D (with a cabinet
front of 3/4" (19mm))
F 2472 Vi,
F 2672 Vi
20 11/16"
(525mm)
Cabinet front
3/4"-1 1/2" (19–
38mm)
Door handle 9 5/16" (237mm)
F2462Vi,
F2662Vi
26 5/8"
(677mm)
Cabinet front
3/4"-1 1/2" (19–
38mm)
Door handle 11 5/8" (296mm)
* The dimensions of the cabinet front and the door handle vary depending on the
design of the kitchen.
The opening angle of the appliance door must not be limited to 90°; otherwise,
the freezer baskets and ice container cannot be removed.