Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Installation
*INSTALLATION*
47
Mounting the cover in a side-by-side
combination
Insert the joining peg (from the side-
by-side kit) halfway into the channel
in the cover for the left-hand appli-
ance.
Place the second cover onto the pin
and press the two covers together.
Click the two covers together into the
niche above the appliance.
Fit the two plastic covers on both
sides of the appliance door by click-
ing them into the gap between the
appliance door and the cabinet door,
starting at the bottom and working up
to the top.
Secure both sides of the appliance
using at least 3 clips for the cov-
ers.
Now attach the covers onto the re-
taining clips on both sides.
In the case of side-by-side installa-
tion, the covers are only required on
the outer side.