Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Selecting additional settings
80
The Water Filter Display has been
switched off.
Resetting the Water Filter Display
After you have replaced or cleaned the
water filter, you must reset the Water Fil-
ter Display so that it can be displayed
again after 6months.
If you do not reset the display, it ap-
pears again and again.
In Settings mode , use the and
sensor controls to select the Water
Filter Display and select OK to confirm
your selection.
Use the and sensor controls to
select Reset and select OK to confirm
your selection.
The Replace the water filter message dis-
appears from the display.
The Water Filter Display has been acti-
vated for the next time the water filter
requires cleaning or replacing.