Fully Integrated 36” MasterCool II All Refrigerator: K 2901 Vi / K 2911 Vi All Freezer: F 2901 Vi / F 2911 Vi Bottom Mount: KF 2901 Vi / KF 2911 Vi French Door: KF 2981 Vi Shown: KF 2981 Vi Please note: This information is subject to change 8miele.
Fully Integrated 36” MasterCool II SPECIFICATIONS Overall Unit Dimensions 353/4” (908 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche Minimum Cabinet Niche Opening Interior Volume 36” (915 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D K 29x1 Vi F 29x1 Vi KF 29x1 Vi Refrigeration Volume ** 0 ** Freezer Volume 0 ** * Electrical Electrical Requirements K 29x1 Vi F 29x1 Vi KF 29x1 Vi 110V / 120V, 60Hz, 15 Amps In the case of s
Fully Integrated 36” MasterCool II CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 36” MasterCool II POWER SUPPLY AND WATER CONNECTION (Water Connection For F 29x1 Vi & KF 29x1 Vi Only) Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Fully Integrated 36” MasterCool II | K 29x1 Vi & F 29x1 Vi CUSTOM PANEL INSTALLATIONS Minimum 35 3/4” (908 mm) Minimum 3/4” (19 mm) outside frame 106 Pounds Page 5 of 12
Fully Integrated 36” MasterCool II | K 29x1 Vi & F 29x1 Vi DOOR PANEL DIMENSIONS KFP 3604 - Door Panel Available as an accessory for the following models: • K 29x1 Vi • F 29x1 Vi Page 6 of 12
Fully Integrated 36” MasterCool II | KF 2901 Vi / KF 2911 Vi CUSTOM PANEL INSTALLATIONS Minimum 35 3/4” (756 mm) Minimum 3/4” (19 mm) outside frame 51 3/8” (1304 mm) 104 lbs HOM - 51 1/2” (1307 mm) - TKH Total height of machine. Can be adjusted to match adjoining cabinets - typically 84” (2133 mm).
Fully Integrated 36” MasterCool II | KF 2901 Vi / KF 2911 Vi DOOR PANEL DIMENSIONS KFP 3614 - Top Panel KFP 3624 - Bottom Panel Available as an accessory for the following models: • KF 2901 Vi / KF 2911 Vii Page 8 of 12
Fully Integrated 36” MasterCool II | KF 2981 Vi CUSTOM PANEL INSTALLATIONS Minimum 17 13/16” (452.5 mm) Minimum 35 3/4” (756 mm) Minimum 3/4” (19 mm) outside frame 51 3/8” (1304 mm) 104 lbs HOM - 51 1/2” (1307 mm) - TKH Total height of machine. Can be adjusted to match adjoining cabinets - typically 84” (2133 mm).
Fully Integrated 36” MasterCool II | KF 2981 Vi DOOR PANEL DIMENSIONS KFP 3634 - Top Panels KFP 3624 - Bottom Panel Available as an accessory for the following models: • KF 2981 Vi HINGING DETAILS Page 10 of 12
Fully Integrated 36” MasterCool II HINGING DETAILS 115° OPENING Available for the following models: • K 29x1 Vi • F 29x1 Vi • KF 29x1 Vi 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.
Fully Integrated 36” MasterCool II HINGING DETAILS 90° OPENING Available for the following models: • K 29x1 Vi • KF 29x1 Vi 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2” (51 mm) Handle or object that is NOT flush with Cabinet Front. 1-3/16” (30mm) 7/16” (11 mm) 0-1/8” (3 mm) 1-7/16” (36.5mm) 1-11/16” (43mm) 1-15/16” (49.