Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Specifications for the plumbed water connection
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using SuperFrost
- Temperature and door alarm
- Adjusting the interior fittings
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Water filter
106
Performance Data Sheet
Model: Miele 07134220
Use Replacement Cartridge 07134220
NSF System Trade name: WFS200MF & WFS210MF
NSF Replacement Cartridge No: WFC100MF(for WFS200MF) & WFC110MF(for WFS210MF)
System tested and certified by NSF International against NSF/ANSI
Standard 42, 53, 401 for the reduction of the claims listed below.
This system has been tested according to NSF/ANSI 42, 53, 401 for reduction of the substances listed below.
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to
the permissible limit for water leaving the system, as specified in NSF/ANSI 42, 53, 401.
4ubstance
Influent Dhallenge
concentration
Average Seduction
Reduction
requirement
Max Qermissible Qroduct
water concentration
Chlorine Uaste and
Pdor
2.0mg/L ± 10% 97.2% ≥ 50% N/A
$hloramine 3.0mg/L ± 10% 97.2% N/A 0.5 mg/L
1articulate, Class I
particles ≥0.5 to <1 μm
at least 10,000
particles/mL
>99.9% ≥ 85% N/A
"trazine 0.009mg/L ± 10% >94.4% N/A 0.003mg/L
#enzene 0.015mg/L ± 10% >96.8% N/A 0.005mg/L
$arbofuran 0.08mg/L ± 10% >98.8% N/A 0.04mg/L
p-%ichlorobenzene 0.225mg/L ± 10% >99.8% N/A 0.075mg/L
Lead pH6.5 0.15mg/L ± 10% 98.8% N/A 0.010mg/L
Lead pH8.5 0.15mg/L ± 10% 97.9% N/A 0.010mg/L
Mercury pH6.5 0.006mg/L ± 10% >96.5% N/A 0.002mg/L
Mercury pH8.5 0.006mg/L ± 10% >96.6% N/A 0.002mg/L
5urbidity 11 ± 1 NTU 99.1% N/A 0.5 NTU
&thylbenzene 2.1mg/L ± 10% >99.9% N/A 0.7mg/L
5oxaphene 0.015mg/L ± 10% >93.3% N/A 0.003mg/L
"sbestos
10
7
to 10
8
fibers/L;
fibers greater than
10 μm in length
>99% 99% N/A
$yst minimum 50,000/L 99.99% 99.95% N/A
Meprobamate 400ng/L ± 20% >95.2% N/A 60ng/L
Atenolol 200ng/L ± 20% >95.6% N/A 30ng/L
Carbamazepine 1,400ng/L ± 20% >98.6% N/A 200ng/L