Specification Guide

Fully Integrated
36” MasterCool
Please note the following:
• This specication sheet is for a single built-in unit.
• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit specication sheet.
*If design calls for a partition less than 6
5
/16” (160 mm) the left unit’s cutout will require an additional
1
/8” (3 mm) to the width to allow installation of
the Heating Mat/Merge Kit.
SPECIFICATIONS
Overall Unit Dimensions 35
3
/4” (908 mm) W x 83
3
/4”- 85
3
/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel]
Niche
Minimum Cabinet Niche Opening 36” (915 mm) W* x 84” - 85
3
/16” (2134 - 2164 mm) H x 24
3
/4” (629 mm) D
Electrical
K 29x2 Vi F 29x2 Vi KF 29x2 Vi
Electrical Requirements
110V / 120V, 60Hz, 15 Amps
In the case of side-by-side installations, a separate outlet must be used for each appliance.
Power Cord NEMA 5-15 plug, 5 ft (1.52 m)
Plumbing K 29x2 Vi F 29x2 Vi KF 29x2 Vi
Water Supply Requirements -
Connect to a cold water supply only. Do not connect to a low-mineral or
a reverse osmosis system. Must be connected to a shut-off valve. The
water shut-off valve must be accessible after installation. The water pres-
sure must be between 29 psi (2 bar) and 116 psi (8 bar). If the pressure is
higher than 120 psi (8.3 bar), a pressure reducing valve must be installed.
Water Connection Line
-
Standard 1/4” O.D flexible water line. Water line is not included.
Shipping
K 29x2 Vi F 29x2 Vi KF 29x2 Vi
Shipping Weight 435 lbs (197 kg) 462 lbs (210 kg) 507 lbs (230 kg)
Shipping Dimensions 40” (1016 mm) W x 89
13
/16” (1,294 mm) H x 29
1
/4” (800 mm) D
K 2902 Vi (Right Hinged)
Material# 11502710
K 2912 Vi (Left Hinged)
Material# 11502720
F 2902 Vi (Right Hinged)
Material# 11503360
F 2912 Vi (Left Hinged)
Material# 11503390
KF 2902 Vi (Right Hinged)
Material# 11502930
KF 2912 Vi (Left Hinged)
Material# 11502940
Page 2 of 7
KF 2982 Vi (French Door)
Material# 11503020