Operation Manual

^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang the fixing bracket with fitting
aids a onto the inside of the
furniture door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short4x14mm
chipboard screws b. (On cassette
doors only use 4 screws on the
edges).
^
Pull the fitting aids upwards to
remove them c.
^
Turn them around and fit them into
the middle slots on fixing bracket d.
^ Hang the furniture door onto
adjusting bolts a.
^ Loosely attach nuts b on the
adjusting bolts.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning adjusting
bolts a with a screwdriver.
Building in the appliance
47