Operating instructions

Before using for the first time
Protective foil
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
^
Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning and care
^
Treat the stainless steel trim to the
interior shelves and the door shelves
with the Miele stainless steel
conditioner supplied as soon as you
have removed the foil.
^ On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
removed the protective foil.
The appliance doors have a special
finish which is resistant to soiling. Do
not use Miele stainless steel
conditioner on the appliance door.
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
^
Touch the On/Off sensor until the
temperature display comes on.
If the temperature in the appliance is
above 0 °C, only bars will light up in the
temperature display. As soon as the
temperature is below 0 °C, the
temperature display will show the
current temperature inside the
appliance.
The "Freezing" symbol and the alarm off
sensor will flash until the freezer has
cooled down to the correct temperature
for freezing.
The appliance will start to cool, and the
lighting will come on when the door is
opened.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the appliance
until the temperature is at least
-18°C.
Switching on and off
16