Operating instructions
Table Of Contents
- Contents
- Guide to the appliance 4
- Caring for the environment 6
- Warning and Safety instructions 7
- How to save energy 14
- Switching on and off 16
- The correct temperature 20
- Alarm 22
- Super freeze 24
- Freezing and storing food 25
- Defrosting 31
- Cleaning and care 32
- Problem solving guide 35
- Noises 38
- After Sales / Guarantee 39
- Electrical connection 40
- Installation 41
- Installing in a side-by-side combination 45
- Changing the door hinging 52
- Aligning the appliance door 61
- Building in the appliance 62
Joining the two appliances
together
The following fixing parts are supplied:
The following tools are supplied:
r SW 10 spanner
q SW2 allen key (supplied with
stainless steel appliances for
adjusting the height of the hinge
plate)
You will also need the following:
–
Spirit level
–
Cordless screwdriver
–
TX 25 screwdriver
^
Before starting, peel off any
protective foil from the appliance
casing.
Installation steps at the front of the
appliances
^ Use spanner r supplied to screw in
feet (for supporting the appliance
doors) a completely. They must not
come in contact with the floor.
^ Fit covers a to the four front feet.
^
Place the appliances next to one
another so that the fronts are aligned,
leaving a gap of 10 mm between
them.
Installing in a side-by-side combination
46