Operating instructions
Table Of Contents
- Contents
- Guide to the appliance 4
- Caring for the environment 6
- Warning and Safety instructions 7
- How to save energy 14
- Switching on and off 16
- The correct temperature 20
- Alarm 22
- Super freeze 24
- Freezing and storing food 25
- Defrosting 31
- Cleaning and care 32
- Problem solving guide 35
- Noises 38
- After Sales / Guarantee 39
- Electrical connection 40
- Installation 41
- Installing in a side-by-side combination 45
- Changing the door hinging 52
- Aligning the appliance door 61
- Building in the appliance 62
Attaching the connecting panel will
align the appliances in depth.
If one of the appliances protrudes
further forward than the other, start with
the further forward appliance:
^ Position the connecting panel g so
that the vertical slots are on the side
of the panel which will be attached to
an appliance first. Attach it loosely
with two screws h.
^ Push connecting panel g until the
central stay on the bracket touches
the side of the appliance.
^ Now tighten both screws h.
^
Secure connecting panel g to the
other appliance. To do this push the
appliances together a little, as
necessary.
Installation steps at the back of the
appliances
^
Fit connecting bracket i onto the
top of the sides in the middle.
^ Fit connecting piece j into the
relevant gap below.
^ Tighten connecting piece j using
screw k supplied.
Warning: Do not drill a hole in the
appliance for this screw.
To avoid vibrations, the connecting
bracket, connecting piece and
screw must not touch the pipework
at the back of the appliances.
Installing in a side-by-side combination
48