Operating instructions

Table Of Contents
^
Then separate retaining plate f from
cover e, by pushing it slightly to the
left and then pulling the cover
forwards and off.
^
Rotate retaining plate f by 180°.
^
Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
^
Remove cover g, rotate it by 180°
and fit it to the opposite side.
^
Then fit cover e together with
retaining plate f on the opposite
side.
^
Remove cap h from the bearing
bush in the door and refit on the
opposite side.
Changing the door hinging
55