Operating instructions
Table Of Contents
- Contents
- Guide to the appliance 4
- Caring for the environment 6
- Warning and Safety instructions 7
- How to save energy 14
- Switching on and off 16
- The correct temperature 20
- Alarm 22
- Super freeze 24
- Freezing and storing food 25
- Defrosting 31
- Cleaning and care 32
- Problem solving guide 35
- Noises 38
- After Sales / Guarantee 39
- Electrical connection 40
- Installation 41
- Installing in a side-by-side combination 45
- Changing the door hinging 52
- Aligning the appliance door 61
- Building in the appliance 62
The appliance door can be aligned to
the housing using the outer long slots in
the lower hinge plate.
In the following illustration the door
is not shown in the closed position to
make it easier to see what you have
to do.
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^
Then tighten screws b again. Screw
a does not need to be used again.
Aligning the appliance door
61